Location:
Search - LED effect
Search list
Description: AT90CAN128测试例程LED，用ISP或者JTAG烧录，效果比较明显。-AT90CAN128 test routines LED, with the ISP or JTAG programming, the effect is obvious.
Platform: |
Size: 376832 |
Author: husheng |
Hits:
Description: 对独立按键功能进行设置，前面3个按钮 按下LED灯亮 松开LED灭，同时加上延时效果。-Key features of the independent set, in front of three LED lights release button is pressed LED off, while adding delay effect.
Platform: |
Size: 2048 |
Author: 许柳 |
Hits:
Description: 1、设计能带8个LED发光管发光，并按照要求轮流发光，产生流水灯的流动效果。
2、应具有两种以上不同风格的流动闪亮效果。比如依次点亮或者依次熄灭。（选作）
3、有起动、停止控制键。（选作）
4、有流动闪亮效果选择设置键。（选作）
5、对所编写的电路进行编译及正确的仿真。-1, designed to bring eight LED light tube light, and in accordance with the requirements of the light-emitting turn, produce light water flowing effect.
2, should have more than two different styles of flow shiny effect. For example, turn off lights or sequentially. (Selected for)
3, start, stop, control keys. (Selected for)
4, flow shiny effect Settings button. (Selected for)
5, prepared by compiling and correct circuit simulation.
Platform: |
Size: 64512 |
Author: li |
Hits:
Description: 本实验将实现如下功能：本实验通过代码控制ALIENTEK MiniSTM32开发板上的两个LED：DS0和DS1交替闪烁，实现类似跑马灯的效果。-The experiment will achieve the following functions: this experiment through the code control alientek ministm32 development board two LED:DS0 and DS1 flashing alternately, achieve the effect similar to the marquee.
Platform: |
Size: 18432 |
Author: 张鑫 |
Hits:
Description: 通过FPGA实现图形的增强效果，并通过LED显示器进行显示.-Through the FPGA to achieve the effect of graphics, and through the LED display.
Platform: |
Size: 222208 |
Author: 洪依 |
Hits:
Description: 通过FPGA实现LED点阵效果的显示。使用quartusii平台，verilog编程-Through LED to achieve the display of FPGA matrix effect. Using QuartusII platform, Verilog programming
Platform: |
Size: 2108416 |
Author: 洪依 |
Hits:
Description: tm4单片机产生spwm波，控制板载led灯，实现呼吸灯明暗交替效果-tm4 spwm wave generated by the microcontroller, to control the onboard led lights to achieve the effect of breathing light alternating light and dark
Platform: |
Size: 49152 |
Author: weycen |
Hits:
Description: 适合初学者学习51单片机时参考的代码，一共有7份代码。
1.最简单的点亮LED灯到实现流水灯效果
2-7.点亮数码管-数码管模拟显示时间-轮询机制实现按键调节时间-使用中断控制时间
代码有我练习时从简单到一步步增加功能的过程，希望能帮到初学者
-
Suitable for beginners to learn 51 SCM reference code, a total of 7 code.
1. The most simple light LED lights to achieve the effect of water lights
2-7. Turn on LED- LED display time- Polling mechanism to realize key adjustment time- Use interrupt control time
Code I practice simple to step by step increase the function of the process, hoping to help beginners
Platform: |
Size: 4096 |
Author: 谢军 |
Hits:
Description: 基于51单片机LED超炫酷跑马灯，渐亮渐暗，拖尾效果-Based on the 51 single-chip LED cool cool marquees, gradually fade dark, smear effect and so on
Platform: |
Size: 44032 |
Author: samuel |
Hits:
Description: 51单片机彩灯控制器的设计包含程序源代码及proteus仿真图。实现了如下功能：
1. 用16盏以上的LED小灯，实现至少4种彩灯灯光效果（不含全部点亮，全部熄灭）；
2. 可以用输入按钮在几种灯光效果间切换；
3. 可以通过按钮暂停彩灯效果，使小灯全亮，再次按下相同按钮后继续之前的效果；
4. 增加自动在几种效果间切换的功能，并设置一个按钮可以在自动模式和手动模式间切换；
5. 使用定时中断延时。
注:程序中一共有十钟灯光效果，分别是：
顺时针流水灯、逆时针流水灯、交替闪烁、顺时针对角灯、逆时针对角灯、顺时针逐个点亮、顺时针逐个熄灭、逆时针逐个点亮、逆时针逐个熄灭、二进制加法。-51 single-chip lantern controller design includes program source code and Proteus simulation diagram. To achieve the following functions:
1 with 16 or more LED lights, 4 lights lighting effects to achieve at least (excluding all light, all out)
2 can use the input button to switch between several lighting effects
The 3 button to suspend the lantern effect, so that the small lights lit again, press the same button to continue the previous effect
4 increase the automatic switching between the effects of several functions, and set a button can switch between automatic mode and manual mode
5 use timing interrupt delay.
Note: the program has a total of ten clock lighting effect, respectively:
Clockwise and counterclockwise running lights, water lights flashing, clockwise and counterclockwise diagonal diagonal light lamp, clockwise by light, clockwise and counterclockwise by light go out one by one, one by one off, binary addition counter clockwise.
Platform: |
Size: 22528 |
Author: mengkunsoft |
Hits:
Description: 呼吸灯显示的一个效果是，灯从灭缓慢的变亮，然后从亮缓慢的变暗，如此循环。
在刚开始设计呼吸灯的时候，可能大家想通过LED灯两端的电压，使电压从零逐渐的增加来实现从灭变亮的这个过程，然后再将电压逐渐降低到零来实现从亮到灭。但是咱们必须要明白一个事实，FPGA引脚输出的电压只有“0”和“1”之分，我们是不能使FPGA的引脚输出电压慢慢增加的。所以通过控制LED灯两端的电压来实现呼吸灯是达不到效果的。
虽然咱们不能使FPGA引脚输出电压从逐渐增加或减小，但是我们可以控制其输出高低电平的时间，若要控制呼吸灯从灭到亮的过程，我们可以使呼吸灯在单位时间内亮的时间依次增加，这样就可以形成这种逐渐变亮的效果。-One effect of the breathable lamp display is that the light fades slowly and then slowly darkens the light, so the loop.
At the beginning of the design of the breathing light, you may want to LED voltage at both ends of the voltage zero to gradually increase the light to achieve this process, and then gradually reduce the voltage to zero to achieve light to off The But we have to understand the fact that the FPGA pin output voltage is only 0 and 1 of the points, we can not make the FPGA pin output voltage slowly increased. So by controlling the voltage across the LED lights to achieve the effect of breathing lights is not up to the effect.
Although we can not make the FPGA pin output voltage gradually increase or decrease, but we can control the output of its high and low time, to control the breathing light the light to the process of light, we can make the breathing light in the unit time Of the time in turn increase, so that you can form this gradually brightening eff
Platform: |
Size: 1346560 |
Author: 张远桥 |
Hits:
Description: 智能小车超声波避障
利用单片机实现超声波测距，led显示功能，完美实现避障效果-Intelligent car ultrasonic obstacle avoidance
The use of single-chip ultrasonic ranging, LED display function, the perfect obstacle avoidance effect
Platform: |
Size: 72704 |
Author: 夏子强 |
Hits:
Description: 介绍了进行stm8s clock外设方法和实例，通过选取不同时钟源，使单片机用不同频率运转代码。并通过LED指示灯，清楚的看到效果-Introduced to the stm8s clock peripheral methods and examples, by selecting a different clock source, so that the microcontroller with different frequencies to run the code. And through the LED indicator, clearly see the effect
Platform: |
Size: 391168 |
Author: DengVincent |
Hits:
Description: 通过代码控制ALIENTEK战舰STM32 开发板上的两个LED：DS0和 DS1 交替闪烁，实现类似跑马灯的效果。(Through the code to control two LED:DS0 and DS1 ALIENTEK battleship development board STM32 flashes, achieve the effect similar to the marquee.)
Platform: |
Size: 1861632 |
Author: nickPark
|
Hits:
Description: 本实验通过代码控制开发板上的两个LED：DS0和DS1交替闪烁，实现类似跑马灯的效果(n this experiment, control two LED:DS0 and DS1 development board flashing through the code, to achieve the effect similar to the Marquee)
Platform: |
Size: 464896 |
Author: 世凯
|
Hits:
Description: STC89C52单片机，用以实现LED的呼吸灯效果(STC89C52 microcontroller, to achieve the effect of LED breathing lamp)
Platform: |
Size: 7168 |
Author: 成功5045
|
Hits:
Description: 利用SysTick产生的延时函数，实现LED跑马灯效果(Using the delay function generated by SysTick to realize LED marquee effect)
Platform: |
Size: 2942976 |
Author: sungoing
|
Hits:
Description: 通过开发板上载有的3个按钮（KEY_UP、KEY0、KEY1），来控制板上的2，LED（DS0和DS1），其中KEY0控制DS0，按一次亮，再按一次，就灭。KEY1控制DS1，效果同KEY0。KEY_UP则同时控制 DS0和DS1，按一次，他们的状态就翻转一次。(Some 3 buttons are uploaded through the development board (KEY_UP, KEY0)
(KEY1) to control the 2 LED (DS0 and DS1) on the board, where the KEY0 controls the DS0, press it once, and then press again.
KEY1 control DS1, the effect is the same as KEY0. KEY_UP controls both DS0 and DS1 at the same time, and their status reverses once.)
Platform: |
Size: 2598912 |
Author: 菜鸟1号
|
Hits:
Description: RGB LED灯实现红绿蓝等其他颜色的渐变，并保持一段时间的停留，给人七彩变化的效果(RGB LED light red green blue and other colors of the gradient, and maintain a period of stay, give people a colorful change effect)
Platform: |
Size: 1024 |
Author: 风缘
|
Hits:
Description: 用8*8的led屏显示爱心及呼吸灯效果，芯片STAC89C52(With 8*8 LED screen shows love and breathing lamp effect, chip STAC89C52)
Platform: |
Size: 35840 |
Author: 木穆沐
|
Hits: